In 2015 we built a new house with CAT6 and Coax to most rooms. I was grandfathered in to the "free" router from my old house and they swapped out my old Actiontec MI424WR with the Rev I. I was paying for 25/25, then got bumped up to 75/75 and my recent bill says 100/100. On the hardwired computer I'm getting about 110. The equipment was installed into a panel by Verizon and I'm 99% sure they used a new ONT - the old one was left at the house, but it is a white square box that fits nicely into the bottom left of the Legrand OnQ 28 inch box. The Actiontec is sitting on top of the box. Everything is connected to a UPS and a whole house generator.
The house is pretty large and the router is in the basement, so I have an Ubiquiti UAP-LR on the ceiling of my main level that seems to work OK even though that is EOL and will be replaced at some point for the current model (unless somebody has a better idea - hopefully something that hangs from the ceiling as the outlet is there).
For TV hardware, I'm using TIVO (also an older Roamio Plus - so cablecard and no set top boxes from Verizon) and a handful of TIVO Minis - so I need MoCA and everything is working well (mostly - a couple of channels are erratic and break up periodically, but that is most likely a Verizon and not an equipment issue).
why am I posting? I'd kind of like faster internet but my current setup is working fine and I'm curious if I can get gigabit speeds with the current equipment (I also don't really want to rent equipment). From what I hear, the ancient Actiontec (Rev I) should work - but will it? It took me awhile to get everything set up and I'm not looking forward to starting over.
Thoughts?