Child Item

Site Totals

61376 Questions Answered 267 Categories

Xbox One - Not Connecting for Multi-player games

All of a sudden (or maybe after a recent firmware upgrade) my Xbox One will not maintain a connection to allow for multi-player or first person shooter games. Have tried multiple games (Overwatch, Modern Warfare, Rainbox Six-Siege) and none of them will allow for this. All was fine until about a week to 10 days ago when Verizon pushed out some updates for what I thought was the TV platform which changed the guide, and other on screen experiences, and now wondering if they also pushed something for the router as well like a firmware upgrade. I also have a PS4, which continues to work flawlessly and is lightning fast with no lag, no trouble connecting, etc. along with multiple other devices connecting both via ethernet and wireless and they all appear to be working just fine. I get error in Xbox Settings stating that NAT type is Moderate (when it's always been Open) and that uPnP is working. I've logged into myfiosgateway and ensured that in fact uPnP is toggled on. I have a G1100 Quantum Gateway. Things I've tried are below: - Hard Boot XBox Console - No Change - Tried Ethernet with Xbox as well as Wireless. Xbox detects the wireless connections and connects to the wi-fi, but still unable to play multiplayer games Toggled uPnP on/off, rebooted router, rebooted console attempted again, no change Factory Reset the Router, hard boot console, re-connected, no change. So I wondered if it was actually an Xbox issue, so I used my Verizon Cell Hot Spot as an alternate Wi-Fi network, Xbox connects to that just fine, and multi-player games work just fine, no issues. Which tells me that it's something with my Verizon G1100. I have read all sorts of blogs, posts about Port Forwarding, MAC filtering, etc., but that doesn't explain why this just happened all of a sudden. I find it hard to believe that evvvvvvveryone who got a firmware push/upgrade that's using a G1100 and has an Xbox is having these same issues. Is it possible that I need a replacement router? Is there some other setting I should have enabled? I would assume that since other devices are OK the router is still OK? At this point, I just want Xbox to work like it was 10 days ago when it mysteriously began to NOT work which happened to be when FiOS put out an updated all services rebooted and I saw a change to the TV Guide and other TV interfaces. Help!

Comments

Cang_Household

The new firmware for G1100 is 02.03.00.04, reported to be loaded on G1100 automatically around September 18, 2020.

It seems like G1100 tightens security measures to disallow certain Xbox inbound traffic. To resolve this problem, while not compromising the security of your home network, you need to contact Microsoft X-Box support to ask which outbound ports are used by X-box for triggering inbound ports (I doubt normal technical support would know for certain). Then you need to configure port triggering (not port forwarding) entries on the router.

The other unsafe solution is to place the X-Box's IP in the DeMilitarized Zone (DMZ). This setup essentially let X-box bypass all firewall restrictions and be completely exposed to the public internet (as well as hackers.)

UPnP just sounds unsafe to me. I disabled UPnP on my Cisco router.

JPDUBL07

According to Xbox Support the following must be Open for Xbox Live to work. Is this what you're referring to?

UDP: 88, 3074, 53, 500, 3544, and 4500

TCP: 3074, 53, 80

So these are what needs to be open, but having this info isn't sufficient to make a configuration change on the router? I still need to know what outbound ports are use by Xbox to triggering inbound?

Also, I am able to get to the Port Triggering portion of my router, but once there, not entirely sure what to click on, and the user guide, although extensive, isn't entirely helpful.

I see that I can click on ADD, then I can give it a Service Name (assume I can just say XboxOne). Then I have 2 sections. One is Outgoing Trigger Ports, which gives me a "New Trigger Ports" button, the other is Incoming Trigger Ports to Open, which gives me a "New Opened Ports" button. If I chose New Trigger Ports, I can then select the protocol (UDP or TCP), then I am asked to enter a Source Port and Destination Port both of which give me the option of Any, Single, or Range.

But again, not sure what I should be clicking on, or if I am even in the right area...any additional assistance you can provide would be great (and make my kids super happy).

Cang_Household

In order for Port Triggering and Port Forwarding to work, you need both inbound and outbound source and destination ports, a total of four ports per configuration entry.

For example, for the UDP 88 port,

Outgoing Triggering Ports: UDP, Source port 88 -> Destination port 88

Incoming Ports to Open: UDP, Any -> Same as Initiating port

Then repeat this for every port. For the TCP 80 port, that is reserved for your router's remote GUI access, I don't think you can setup port triggering for this one.

@JPDUBL07 wrote:
...make my kids super happy

Oh, I see. They should learn some networking to help their parents in the future 🙂

JPDUBL07

Protocol Outgoing Trigger Ports Incoming Ports to Open Action

XBoxOne

UDP 88 -> 88

UDP 500 -> 500

UDP 3544 -> 3544

UDP 4500 -> 4500

UDP 53 -> 53

UDP 3074 -> 3074

TCP 3074 -> 3074

TCP 53 -> 53

UDP Any -> 88

UDP Any -> 500

UDP Any -> 3544

UDP Any -> 4500

UDP Any -> 53

UDP Any -> 3074

TCP Any -> 3074

TCP Any -> 53

Edit/Remove

So hopefully this is what you're stating for me to do. Assuming it is, does this require a router re-start in order for it to take effect or simply apply the changes in the router interface and then try the Xbox again?

Child Item