VZ Fios ONT w/UDM Pro Ethernet for Video Distribution

Teddy9001

Hi new to Fios here very soon. Been reading up on this board and others on not using VZ router and using mine instead. Wondering if this setup will work as expected:

ONT (Ethernet) < --- > UDM Pro < -- (Ethernet) -- > MOCA Adapter < --- COAX --- > Cable Outlet (feed the rest of the house STB's ?)

Thanks in advance.

Capricorn1

In theory, at least, that setup should work just fine. I had a similar setup for years when I had my own router as well as Fios TV service and Fios STBs. At some point in there, I also use a CableCard in the TiVo DVR with a coax connection fed by the same MoCA adapter. (This was a loooooong time ago.)

I would suggest making sure the MoCA adapter you use is the same MoCA standard (e.g., MoCA 2.0, MoCA 2.0 bonded, MoCA 2.5) that your STBs are using.