why is ethernet better...faster speeds than coax? if so how much difference?
In terms of Verizon the ONT that they install is MoCA 1.1 so the coax is limited to 100 mbps. Any speeds over 100 mbps they have to run ethernet from the ONT to your router. They also typically run ethernet and any new installs these days.
The latest version of MoCA is 2.5 which is supposed to be able to reach speeds fo 2.5 gbps over coax. A cat6 ethernet wire is rated for 10 gbps.
I have the Actiontec router. I'm thinking about upgrading to the quantum router. My Actiontec is connected to the ONT by coax. I know that I can ask FIOS to activate the ethernet port so that I can connect the Actiontec router via ethernet cable.
Does it make any difference whether the Actiontec router is connected by coax or ethernet? Is there an advantage of one over the other?
I'm also contemplating upgrading to the TV One & TV One mini. Can the TV One be connected either by coax or by ethernet? Does it make any difference? Is there an advantage of one over the other?
@pcnerd wrote: I have the Actiontec router. I'm thinking about upgrading to the quantum router. My Actiontec is connected to the ONT by coax. I know that I can ask FIOS to activate the ethernet port so that I can connect the Actiontec router via ethernet cable.Does it make any difference whether the Actiontec router is connected by coax or ethernet? Is there an advantage of one over the other?I'm also contemplating upgrading to the TV One & TV One mini. Can the TV One be connected either by coax or by ethernet? Does it make any difference? Is there an advantage of one over the other?
It doesn’t really matter unless you upgrade your internet speed beyond 100 mbps or if you want to use your own router.
Yes FiOS TV One can run on the coax there is no need to change the WAN to ethernet.
I learned something today! I didn't know that the ONT is limited to 100 mbps.
Does FIOS plan to upgrade the ONT to the current version of MoCA?
@pcnerd wrote: I learned something today! I didn't know that the ONT is limited to 100 mbps.Does FIOS plan to upgrade the ONT to the current version of MoCA?
The newer GPON ONTs do 100 mbps over coax and the older BPONs max out at 75 mbps. It doesn’t seem like they plan to upgrade the MoCA on ONTs. They run ethernet on all installs now. Hopefully they do because it would be convenient.
OK, I have related questions.
I live in an apartment. The ONT is in the utility room. So's a 23" TV & a QIP 7100 1 STB. A coax comes out of the ONT & connects to a 4-way splitter. One output of the splitter goes to the utility room STB. Another output goes to the router in the utility room. The 3rd output goes to the QIP 7232 2 STB in the living room. The STB in the living room is connected to the 55" TV by HDMI cable. Both STBs have an ethernet port on the back. It's easy to run an ethernet cable from the router in the utility room to the utility room STB. I don't want to run an ethernet cable from the utility room out the door, across the wall, into the living room & connect to the living room STB. Can the living room STB AND the utility room STB be connected wirelessly to the router? I could be wrong, but I don't think that it's possible to wirelessly connect my STBs to the router. I think that the TV One AND the TV One mini can be connected wirelessly to the router, can't they?
I want to get the TV One for the living room & the TV One mini for the utility room.
My Verizon I-211M-L ONT was installed in October 2018 and the datasheet states that it supports MoCA 2.0.
The Quantum Gateway user guide states:
The Ethernet WAN Internet connection supports 10/100/1000 Mbps. The LAN Ethernet connections support 10/100/1000 Mbps. The 802.11ac wireless connection supports up to 1300 Mbps and the 802.11n supports up to 450 Mbps, depending on signal quality. The Coax (MoCA 2.0) connection supports 700 Mbps.
Sue, what internet speeds are you getting through your setup? I also have the same ONT you listed and when I inquired about raising my speed I was told that Verizon would have to come out, at my expense, and upgrade the ONT because it will only handle speeds up to 100mbps, yet I do get fluctuations of plus/minus 5-10mbps up or down so if my ONT is only designed to cap at 100mbps how do they explain when it fluctuates over that cap? I think it’s just a con to get them to come out and replace things at my cost, as I was told I’d have to pay like over $130 bucks, or something like that, for the hardware that was needed for me to get speeds higher than 100mbps. If it’s just a simple case of running Cat6 from the ONT to the router I can do that myself without paying a dime. Anyone else who might have some insight on this, I’d love to hear what you have to say. Thanks in advance and hope you all are having a great day. Shawn.
There seems to be a debate of whether the ONT is MoCA 2.0 or 1.1, but whatever the version Verizon only does 100 mbps or below on MoCA. 150 and above requires ethernet. 100%, no exceptions.
What you can do is run your cat6 and go to VZ direct at dslreports.com and have them switch your connection from MoCA to ethernet. Once switched you can upgrade to any speed you want to as long as you have a Nokia 211 or Arris 1000G. If you have an older Bpon model then a tech will have to come out an upgrade the ONT.
@DJDarkGift Shawn, This is my situation exactly. Am now going to ask Verizon to activate my ethernet port and see if I can then easily install my new Archer A7 router. Am a newbie to this topic, learning at every teeny tiny increment. What did you end up doing?
This thread will be locked in order to keep discussions current. If you have the same or a similar question/issue we invite you to start a new thread on the topic.
![Photo of [Deleted User]](https://we.vanillicon.com/v2/ed53a0ea8d4610e2e903eda78cf49f29.svg)