Hello all,
It’s been 3 days of calls to Verizon, chats with Google tech, and my own countless hours of research trying to fix my issue with no luck. I hope someone here can help. Here’s my story:
I had a triple play (tv, internet 75/75, and landline) from Verizon and decided to buy google nest mesh as I intended to drop cable tv and up my internet. My first step was calling Verizon to change my internet from MoCa to Ethernet. I then ran an Ethernet wire (cat6a) directly from the ONT to my Google Nest Mesh. Internet works - getting around 70/70 and no dead spots - all is well.
I then proceed to cancel cable tv and up my internet to 400/400. I wait a day and notice my speeds are only 90/60. I call Fios and they said it seems fine from their end. I IM google tech and they change my DNS to 1.1.1.1 and 1.1.0.0. Said give it an hour; no improvement.
I call Verizon the next day who said they can’t help. I say I still have my Verizon quantum 1100 router - plug it in (Verizon router only) and on the 5G WiFi I get full 400/400 via a third party speed test. I foolishly proceed to hang up and think all is well. However(!) I soon realize when I plug in my laptop directly to the Verizon router and run a speed test from the Verizon site I get 200/130. Additionally, when I use 5G Wifi and step back only 10 feet my speeds go down to 150/100 via the 3rd party speed test. Lastly, when I use the 2.4 connection the speed it’s just plain bad 30/10.
I try unplugging the Fios router and connecting google mesh Wifi and am staying at 90/60. I read online to unplug google Wifi overnight to refresh, but still no improvement...
my last effort was plugging the google nest into the Fios router Ethernet 1 slot - I know this is a double NAT until I disable Fios WiFi but it doesn’t matter bc it didn’t help either. Speeds stayed the same on google ~90/~60
today I just ordered the new 31100 Fios router per their request but why?! Why would a new router do anything? I have google nest WiFi and it’s not any better than the 1100 Fios router with speed...
I don’t know what to do... I’m waiting for the new router from Fios but ultimately want to use google mesh as it alleviates all dead spots. While I’m waiting for the Fios router I just upped my speeds to 1gig with hopes that even if it only goes up to half (500mbps) that I’ll be content. I doubt it’ll go up at all.
please please help...