Child Item

Site Totals

61368 Questions Answered 267 Categories

G3100 and G3200 using MoCA

I have a G3100 connected to the ONT via ethernet and coax. I am trying to get a G3200 extender working via MoCA. Is this possible? On the G3200 I get a solid yellow light on the front. The Coax light on the back is solid green. The coax line I am using works for Fios STB. Any thoughts? Thanks.

Comments

Edg1

Should be just plug and play. Try connecting the G3100 and E3200 directly to each other with a coax jumper. This will rule out possible wiring/splitter issues.

MBNYM86

Were you able to use the STB Coax connection and split it for the extender over coax? or did you need to run a new cable? Hopefully not.

charlyc

You should be able to use the included splitter so you can locate the E3200 extender anywhere you have a coax outlet even if you have a TV at the location. It should be plug and play but if you have any problems just reset by using a paperclip on the button in red on the back of the extender and wait until the light stops blinking and you get a solid white.

Child Item