Child Item

Site Totals

61493 Questions Answered 271 Categories

Need help adding a Route and/or second LAN IP to Westell 9100OEM Router

Hi everyone, I'm using a Westell 9100 Router for my business class connection, with 5 static IP address.

Here is my issue-- I currently have multiple IP networks on my LAN, but are not vlan tagged.

I have a 192.168.1.x network, as well as a 192.168.2.x, and 10.1.1.x network.

How can I add routes and/or interfaces on the Westell to be able to route traffic from one network to the other, using my westell as teh gateway?

I've tried adding routes and tried adding ip addresses to my lan interface on the westell, but neither of them work.

I'm guessing I'm missing something simple, and the user manual isnt much help.

Thanks in advance,

James C{edited for privacy}

Message Edited by Jonathan_K on 05-08-2009 01:29 PM

Comments

prisaz

To the best of my knowledge the Westell 9100 will only support a single LAN network address as the default gateway. For a business class connection with multiple subnets you would need a better router that supports IP chains or IP routing tables for the LAN side. On the WAN side the router will support the 5 static addresses to be mapped or forwarded to internal addresses, but I think they must all be on the same subnet.

Child Item