I have been using a Verizon dry loop DSL and VOIP (VYLMedia) for my phone for about two years. About one year ago (with no equipment change) the call would temporarily drop and then reconnect. This was a hindrance but at least you could talk. The past couple of months the frequency of dropping out during a call as about every 3 sec and I cannot carry on a conversation this way. I was told by my VOIP provider, 1-VOIP, that this is called jitter.
I have been working with the tech rep for over a week now and we cannot get it resolved. I have a Westell Versalink 327W wireless router (Verizon) and a Linksys SPA2102-R phone adaptor from 1-VOIP. He did alot of tweaking to no avail. He sent me a new phone adaptor this morning and that didn't help.
After this morning's tweaking session this is what he told me:
You are currently being registered on 50484 to our system, which can indicate that your ISP and/or equipment is blocking the proper authentication and registration on the appropriate ports.
You will need to forward the following ports to the phone adapter in order to have consistent phone quality as well as incoming phone calls:
5060-5160 UDP
10,000 – 20,000 UDP
You can still obtain this configuration with the proper ports forward which will ensure you have consistent and proper voice quality.
Using a link I found in this forum I tested the quality of line for speed and jitter. It showed 0.0mg jitter and no packet loss. The MOS score was 3.9. Upload: 738Download: 2.8
I am now thoroughly confused and have no idea how to get this resolved. Any takers?
