Hello, i have had multiple CR1000B routers that periodically restart (every few hours) shortly after installation with the following in the log:
2023 Aug 28 17:08:36 info dnsmasq: [SYS.6][SYS] started, version 2.80 cachesize 1500
2023 Aug 28 17:08:36 info dnsmasq: [SYS.6][SYS] compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
2023 Aug 28 17:08:36 warning dnsmasq: [SYS.4][SYS] warning: interface br-lan3 does not currently exist
2023 Aug 28 17:08:36 warning dnsmasq: [SYS.4][SYS] warning: interface br-lan2 does not currently exist
2023 Aug 28 17:08:36 warning dnsmasq: [SYS.4][SYS] warning: interface br-lan1 does not currently exist
2023 Aug 28 17:08:36 warning dnsmasq: [SYS.4][SYS] warning: interface br-lan does not currently exist
2023 Aug 28 17:08:36 info dnsmasq: [SYS.6][SYS] using local addresses only for domain mynetworksettings.com
2023 Aug 28 17:08:36 warning dnsmasq: [SYS.4][SYS] no servers found in /etc/resolv.conf, will retry
2023 Aug 28 17:08:36 info dnsmasq: [SYS.6][SYS] read /etc/hosts - 3 addresses
2023 Aug 28 17:08:36 info dnsmasq: [SYS.6][SYS] read /etc/hosts.dnsmasq-dns-lan0 - 5 addresses
2023 Aug 28 17:08:36 info dnsmasq: [SYS.6][SYS] read /etc/ipv6_hosts - 0 addresses
2023 Aug 28 17:08:36 info dnsmasq: [SYS.6][SYS] read /etc/ipv4_hosts - 0 addresses
2023 Aug 28 17:08:45 info dnsmasq: [SYS.6][SYS] reading /etc/resolv.conf
2023 Aug 28 17:08:45 info dnsmasq: [SYS.6][SYS] using local addresses only for domain mynetworksettings.com
2023 Aug 28 17:08:45 info dnsmasq: [SYS.6][SYS] using nameserver <removed for privacy>
2023 Aug 28 17:08:45 info dnsmasq: [SYS.6][SYS] using nameserver <removed for privacy>
2023 Aug 28 17:08:54 info arc_temper: [SYS.6][SYS] arc-temper start.
2023 Aug 28 17:08:56 info sysup: [SYS.6][SYS] Reboot by Power Cycle/Software Fault induced
The reboot is occasionally by Kernel Panic. I have had two routers that were new that had the same issue. Does anyone know what might be going on here or what "arc-temper" means as technicians I have spoken to are not sure.
Thank you!
