Does FIOS Internet Support Bridging?

I have a wireless router that I really like. For me, a drawback of switching to FIOS internet is that I have to disable the wireless functionality of the FIOS gateway and bridge it to my router, if I want to continue using my own router.

However, I recently discovered that Verizon actually publishes instructions on its own website on how to bridge its various gateways to a third-party router. Does this mean that Verizon supports bridging?

So, for example, If I had to call Verizon technical support about a problem I'm having with FIOS internet, and I tell the tech that I have bridged Verizon's gateway to my own router, the tech won't say "Sorry, I can't help you unless you stop using your router and use only our gateway"?

Accepted answers

Hubrisnxs

no, they don't support bridging over the phone, most rep's are not even aware that you can do it, let alone how to do it, mainly because there are about 8 different ways that you can bridge the router. Each one breaks something about the FiOS usually, so it's a good idea to see the tradeoff's in the links listed below.

All comments

Hubrisnxs

What are the tradeoffs between the various router configurations
Can I use my wireless or an extra router along with the Verizon provided router?
Do I have to use the supplied router with Verizon FiOS?

Bulldog14

Thanks very much for your helpful reply.

If Verizon does not support bridging, why would they publish instructions on their website about how to do this?

Connecting a third-party router to your home network

The instructions don't warn that Verizon doesn't support the procedure.

sangs1

Hmm, if you're talking about bridging the way I understand it, it's a relatively simple process.

Just run an Ethernet cable from your FiOS router to your preferred router, put the preferred router in "Bridge Mode" - or whatever the equivalent is called on your router - give the wireless network a name and your done. We do this and it gives us wireless networks in two different areas of the house. (However, if you're looking for a purely wireless bridge from the FiOS router to the preferred router, I'm not familiar with that set up.)

Hubrisnxs

Those are DSL modems bulldog. So those are different. When you bridge a DSL modem it only affects your internet. When you bridge a fios modern it kills your vod, guide and widgets/caller id on TV. The faq goes over eight to ten different ways you can bridge, and you will notice from the chart that each one breaks some kind of TV feature.

Bulldog14

Right you are! I hadn't noticed that. Smiley Embarassed

Thanks again for your help.

mlpetrozelli

If I have a spare Actiontec from Verizon, can't I simply have the ethernet on the ONT (located in basement) activated, plug that in and get better wireless reception for my finished basement by connecting all of those to the new secondary wireless point instead? Does this affect my onscreen menus, etc. like mentioned by others here?

Hubrisnxs

if you have TWO actiontec's, then you will want to take advantage of this set up.

Can I get an ethernet connection in a room with only coax?

It allows you to put the 2nd actiontec (or your preferred actiontec) in a room that is difficult to get wireless to. You don't interfere with your menu's vod or widgets, and it is connected to the coax with a two way 5-1000mhz tv splitter.