Goal is to use my own router. Had the ONT switched from Coax (moca) to Ethernet that I ran to the back of the verizon router. From the verizon LAN port I connected to the ethernet port on an Actiontec ECB6200 MoCa. From the other side of the actiontec I connected the coax that goes to my digital set top verizon box.
The Power and coax indicta=tor lights on the actiontec are green but the set top box says it does not have a signal. I reset the box but did not fix.
Please can someone help?
Solved! Go to Correct Answer
If using own router the configuration will be like this...
ONT > ethernet > router WAN
ONT > coax > cable splitter IN
Router LAN to ECB6200
Both the STB and ECB6200 need to connect to the splitter. The set-top box can't be connected to the TV/STB OUT port because it doesn't pass MoCA.
If using own router the configuration will be like this...
ONT > ethernet > router WAN
ONT > coax > cable splitter IN
Router LAN to ECB6200
Both the STB and ECB6200 need to connect to the splitter. The set-top box can't be connected to the TV/STB OUT port because it doesn't pass MoCA.
Start a new topic or ask questions in the open forum.
