nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

IPC1100 own router - MOCA adapter

Kipperm13

Hi everyone,

I need some help here. I currently have FIOS gigabit with FIOS TV and phone. I have my own router setup with UniFi Dream Machine Pro (UDM-Pro) and a 24-Port managed PoE switch. I have the internet up and running with no issues.

ONT Cat6 -> UDM-Pro -> USW-24-POE

However my issue is with the FIOS TV. I tired using the FIOS G1100 router but after sometime trying to set up in bridge mode I gave up and just go a actiontec ecb6200 MOCA adapter. I was able to get the VMS1100 to work right away with VOD and TV guide all working. However I can't get the remote STB IPC1100's to see the media server. I get a message "Unable to connect to Media server"

My setup is

ONT Coax -> 4 way Splitter ->

Split 1 - actiontec ecb6200 -> VMS1100 - This is working VOD and TV guide

Split 2- IPC1100 - not working. I tired adding a second actiontec ecb6200 here but also didn't work.

** Note the ecb6200 is also connected to a port on the switch to get the internet working.

From the network switch I am able to see both the VM1100 and the IPC1100 and they both have a IP on the same subnet 192.168.80.X

Any help would be great.

Accepted answers

Edg1

@Jrm1328 wrote:
My setup is
ONT Coax -> 4 way Splitter ->
Split 1 - actiontec ecb6200 -> VMS1100 - This is working VOD and TV guide

Does the VMS1100 connect to the TV/STB out port here? That port range is 5 - 1002 MHz. MoCA operates at 1150 MHz. That may be your issue. Run the VMS1100 and ECB6200 directly from the 4 way splitter. Or place a 2 way at the wall jack and connect one out to the VMS and other out to the 6200.

All comments

Cang_Household

When you have a DVR, the general rule is that a Verizon primary router is required.

G1100's NAT speed and throughput speed are fine. You can put your router behind G1100 with double NAT.

Kipperm13

There are a number of people who have a setup without the Verizon router. Really don't want to have the G1100 in the setup

pish180

Did you end up getting it working? I have a very similar setup however my FIOS comes in via Ethernet from the ONT.

Edg1

@Jrm1328 wrote:
My setup is
ONT Coax -> 4 way Splitter ->
Split 1 - actiontec ecb6200 -> VMS1100 - This is working VOD and TV guide

Child Item