nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Site Totals

1736 Users Online 5857818 Members 366354 Discussions 62117 Solutions

New STB activation errors

Scubasj7

When I installed my new STB and activate it I receive a message on the box the flashes "Hunt FR1, Hunt FR2, Hunt FR3... EBO6"

I set up the box on Thursday and have left it there over the weekend hoping that it would update and go away how ever it continues to cycle through.

I thought that there may be a problem with the co axle cable or the jack so I changed the cable and plugged it into another jack and the issue still continues.

Please advise if you have any incite on this issue.

Thanks

Comments

spacedebris

Hunt means that the stb is not getting any incomming signal

Things to check.

1. make sure that the incomming cable is connected to "RF in" or "fios tv in"

2. make sure that the line is actually connected to verizon service

3. make sure you are using RG6 cable and not the RG59 cable, and that there are no non verizon splitters on the line.

Now if all the above check out. Then the next thing to do is take that box to one of your other tv's that already work, and connect it using those cables. If it works, then the problem is on the line in the other location. If it doesnt work then the problem is the stb itself and you will want to swap it out.