An Accepted Solution is available for this post. Jump to solution.

Steps to Program the Fios Remote to Control the Audio on the STB

jkellam
Newbie
‎12-15-2019 06:50 AM

Anyone know how to do this on the Fios one voice remote?

0 Likes
Reply
1 Solution
An Accepted Solution is available for this post. Jump to solution.
clem21
MVP MVP
MVP
‎12-15-2019 09:52 PM

The fios box can only control audio levels on its analog outputs. When you program the remote in the setup menu, you are programming it to control the volume on your TV, soundbar, or receiver. That's why you still need line-of-sight for the remote to control volume or mute the sound. So go into the menu on the box, look for fios voice remote and program it for your TV model.

In some cases, you may have to manually enter your specific TV and Audio equipment information. Follow these instructions to do so:

  1. Go to Menu > Settings > Voice control > Fios TV Voice Remote > Program Voice Remote > Manual Setup > Press ‘ok’ to Select
  2. Select your TV or Receiver Brand and Model and follow the steps
  3. You will get a ‘success’ message in the upper right of the screen when the setup is complete.

View solution in original post

Reply
1 Reply
An Accepted Solution is available for this post. Jump to solution.
clem21
MVP MVP
MVP
‎12-15-2019 09:52 PM

The fios box can only control audio levels on its analog outputs. When you program the remote in the setup menu, you are programming it to control the volume on your TV, soundbar, or receiver. That's why you still need line-of-sight for the remote to control volume or mute the sound. So go into the menu on the box, look for fios voice remote and program it for your TV model.

In some cases, you may have to manually enter your specific TV and Audio equipment information. Follow these instructions to do so:

  1. Go to Menu > Settings > Voice control > Fios TV Voice Remote > Program Voice Remote > Manual Setup > Press ‘ok’ to Select
  2. Select your TV or Receiver Brand and Model and follow the steps
  3. You will get a ‘success’ message in the upper right of the screen when the setup is complete.
Reply