I have tried just about everything to solve my problem and am now reaching out for help to this forum's members.
I am located in suburban Syracuse, NY and I recently had FIOS TV installed in my house and I have the cable connected directly to my TV's lone coax input. I also have Verizon's M-Series CableCard installed in the TV in lieu of using a set-top box.
My TV is a Panasonic Plasma model TH-50PX600U and it has version 9 of TV Guide On-Screen ( TVGOS ) and a QAM tuner built in.
My problem is that whenever I use this combination, the TVGOS fails to find ANY info from the FIOS feed...even after leaving the TV off for over 48 hours. I know I am setting up the TVGOS system correctly and the CableCard works just fine for TV viewing, picking up all of my subscribed channels. The TVGOS worked fine with my Time Warner Cable I had used previously and it also works fine when I just use an antenna to pick up the local, off the air digital stations.
Using the FIOS cable fed to the back of the TV, with their CableCard installed, it will not find the clock signal, channel lineup, or any listing data at all.
I suspect that FIOS in my area has either stripped-out the TVGOS data stream from the local CBS digital feed, or there is a problem with the CableCard passing the stream to the TV. Since my TV only has one coax input, the option to hook up the antenna on a different input to pull the feed in is not an option.
Does FIOS pass-thru the TVGOS info on their CBS digital feed to customers?
I would appreciate any help that any of you can give me.
Thanks.