The TV one remote is supposed to light up when you pick it up. It was working and then it stopped. It still lights up when you press a key but not when you pick it up.
I had Verizon replace the first remote, and the new one worked for two days and now the motion sensor on it has also stopped working (will not light up when you pick it up).
My kids use the remote too so is there some key combination that turns this the motion sensor on and off that they could have pressed? Or is this new remote also defective too?
Solved! Go to Correct Answer
Try removing the batteries for five seconds and place them back in the remote. The remote will restart and the motion sensor should start working.
i have 4 and they all worked for a couple days and then stopped working. they light up when you press a button but not when you pick it up. very inconvenient when using in bed in the dark
quality control guys, come on now!
Try removing the batteries for five seconds and place them back in the remote. The remote will restart and the motion sensor should start working.
Nope🤷🏼♂️
Removing the batteries for a bit worked for me.
I just tried removing my batteries and then put them back in. A green light came on and my motion sensor is working again. Thanks for the tip!
Thanks for the tip. Having called dozens of help desks during my career I should have known that one. It’s right up there with “unplug it and plug it back in.“
This remote light has me spoiled. Just about had a fit when I kept shaking it and it wouldn’t light up LOL
Worked out fine and the lights are lighting up again....... thanks!
Worked for me. 😊 Thank You
Removing the batteries didn’t work for me and yes the batteries are brand new, any other suggestions please?
@BMB182607 wrote:Removing the batteries didn’t work for me and yes the batteries are brand new, any other suggestions please?
If removing and replacing the batteries didnt work, you may need a new remote. Contact support to have them send you a new one.
Do I have to pay for a new remote or is it replaced for free?
@BMB182607 wrote:Do I have to pay for a new remote or is it replaced for free?
Should be free if the old one is defective. Contact support for a replacement.
This worked great. Removed the batteries, waited 5 or 6 seconds. Replaced the batteries and the cover. The small green light lit up then the entire remote lit up white them went out. Now when I pick up the remote the buttons are illuminated. Thank you for the fix!
As this thread is now over two years old, it will be locked in order to keep discussions current. If you have the same or a similar question/issue we invite you to start a new thread on the topic.
Start a new topic or ask questions in the open forum.
